Call Toll Free: 800-638-3880

Free Shipping on most orders over $200

Order over $200 of eligible merchandise and receive free shipping subject to the following conditions.  Free shipping offer applies to orders in which the cost of shipping is calculated to be 15% or less of the value of items ordered.  If the cost of shipping is calculated to be over 15% of the value of items ordered (based on item weights and shipping destination) then some charges will apply.  Free shipping offer is for Ground or Mail service within the continental United States, does not apply to bulk (third-tier priced) items, RJ items, and cannot be combined with other offers or discounts.  Customers outside of the United States ordering over $200 of eligible merchandise will receive a freight allowance of 15% of their order value to reduce their freight charges. Please email [email protected] or call us at (800) 638-3880 with questions.

Back to Decorating Supplies

Decals & Decal Papers

12 Item(s)

per page
 

Grid  List 

Set Descending Direction
 
  1. Copy Cal Paper for Glass

    Copy Cal Paper for Glass

    SKU: 5618
    $3.50
    • Buy 500 for $2.95 each and save 16%

    Maryland China Company and SUBLIMATION NATION are proud to bring you COPY-CAL waterslide decal paper. COPY-CAL transfers should be printed using a color laser printer with regular laser toner, and the transfers can be applied directly to glass--no special coating is required!

    INSTRUCTIONS FOR USING COPY-CAL DECAL PAPER:
    1. Place paper in color photocopier or color laser printer so that the color image will be printed on the top of the shiny side of the decal paper. Placing the paper in the by-pass tray works best because the paper path is the straightest. If available, we also suggest you set your paper setting on your copier or printer to "thick" from 'plain paper" to pull more color toner onto the Copy-Cal. If this option is not available, Copy-Cal will still work great.
    2. After printing, cut the decal to proper size.
    3. Place glass ware to be decorated in hot water (115-125 degrees F) for a few minutes. Leave the surface wet so the decal will be easy to manipulate.
    4. Place decal paper in lukewarm water (85-95 degrees F) for 3 seconds. Place on table for 45-60 seconds, until decal uncurls.
    5. Slide decal onto glass ware and gently work out all water and air bubbles using a paper towel or squeegie. Work from the center toward the edges. The decal may "bubble" if all the air and water are not removed before heating.
    6. Allow glass to dry for at least 4 hours. Bubbling may also occur if the decal is not allowed to dry sufficiently.
    7. Heat in preheated oven at 350 degrees F for 15 minutes. Thicker glass may require additional heating time. If clear areas turn slightly brown, it is an indication that the heat was too high. Since each oven is slightly different, it may take a few tries to find the ideal temperature setting for your particular oven.
    8. Cool and wipe with water to clean off any excess decal adhesive.

    **Laser copier must have a fuser that uses OIL for lubrication and not WAX**
    Use of COPY-CAL in a laser printer that uses wax for lubrication may destroy the paper and damage your printer.

    COPY-CAL must be ordered in quantities of at least 10 sheets. Learn More
     
  2. Clock Face Decal, Gold, 3.5"

    Clock Face Decal, Gold, 3.5"

    SKU: CLODEC SG
    $1.75
    • Buy 6 for $1.50 each and save 15%

    This clock face decal is gold and measures 3 1/2". It fires onto the china. Learn More
     
  3. Clock Face Decal, Black, 3.5"

    Clock Face Decal, Black, 3.5"

    SKU: CLODEC SB
    $1.25
    • Buy 6 for $1.10 each and save 12%

    This clock face decal is black and measures 3 1/2". It fires onto the china. Learn More
     
  4. Clock Face Decal, Gold, 6.75"

    Clock Face Decal, Gold, 6.75"

    SKU: CLODEC LG
    $3.00
    • Buy 6 for $2.50 each and save 17%

    This clock face decal is gold and measures 6 3/4". It fires onto the china. Learn More
     
  5. Clock Face Decal, Black, 6.75"

    Clock Face Decal, Black, 6.75"

    SKU: CLODEC LB
    $2.50
    • Buy 6 for $2.25 each and save 10%

    This clock face decal is black and measures 6 3/4". It fires onto the china. Learn More
     
  6. Personalized Water Slide Decal Back Stamps, Quantity of 75

    Personalized Water Slide Decal Back Stamps, Quantity of 75

    SKU: BACK 75
    $19.95

    Add an extra personalized touch to your work with your very own water-slide decal back stamps. Please note that they are available in black only and the font and size can not be changed. You can have up to 4 lines with up to 20 characters and spaces per line. Indicate the personalized information exactly as you would like to appear in the "Special Instructions" box during checkout. Quantity of 75. Quantities of 150 (BACK 150) and 300 (BACK 300) also available. Please note that back stamps can take up to 3 weeks to arrive. If you are ordering other items, please let us know whether to ship your other items out right away or if you would prefer to have the entire order held until the back stamps are ready. Learn More
     
  7. Personalized Water Slide Decal Back Stamps, Quantity of 300

    Personalized Water Slide Decal Back Stamps, Quantity of 300

    SKU: BACK 300
    $49.95

    Add an extra personalized touch to your work with your very own water-slide decal back stamps. Please note that they are available in black only and the font and size can not be changed. You can have up to 4 lines with up to 20 characters and spaces per line. Indicate the personalized information exactly as you would like to appear in the "Special Instructions" box during checkout. Quantity of 300. Quantities of 150 (BACK 150) and 75 (BACK 75) also available. Please note that back stamps can take up to 3 weeks to arrive. If you are ordering other items, please let us know whether to ship your other items out right away or if you would prefer to have the entire order held until the back stamps are ready. Learn More
     
  8. Personalized Water Slide Decal Back Stamps, Quantity of 150

    Personalized Water Slide Decal Back Stamps, Quantity of 150

    SKU: BACK 150
    $29.95

    Add an extra personalized touch to your work with your very own water-slide decal back stamps. Please note that they are available in black only and the font and size can not be changed. You can have up to 4 lines with up to 20 characters and spaces per line. Indicate the personalized information exactly as you would like to appear in the "Special Instructions" box during checkout. Quantity of 150. Quantities of 75 (BACK 75) and 300 (BACK 300) also available. Please note that back stamps can take up to 3 weeks to arrive. If you are ordering other items, please let us know whether to ship your other items out right away or if you would prefer to have the entire order held until the back stamps are ready. Learn More
     
  9. Fired-On Decal Paper - Pack of 10 Sheets

    Fired-On Decal Paper - Pack of 10 Sheets

    SKU: 6951
    $29.99
    • Buy 6 for $25.50 each and save 15%

    Use Fired-On Transfer Paper to create water-slide decals of your artwork, images, or photos that get permanently kiln fired onto glazed porcelain and ceramics. All images fire to a beautiful sepia brown and can be "colorized" with china paints or overglazes. Your projects can be oven, microwave, dishwasher and food safe.

    What you need:
    *Access to a ANY HP or Canon Monochromatic (Black and White only) Laser Printer, Copier or Fax machine. As long as it is either an HP or Canon Laser machine and has absolutely no capability of printing in color it WILL work. This is because all Canon and HP black-only laser printers have at least 30% iron oxide in their onboard toner cartridges. Iron oxide is what makes the image work and is why the images always fire to a lovely sepia or reddish-brown. If your printer does not meet this criteria it won't work.
    *Access to a kiln
    *Transfers can be fired directly (no covercoat needed) to cone 06-02 depending on the surface. Direct fired transfers are food safe.
    *In order fire transfers on at a low temperature (cone 018-016) , make a covercoat using any light colored china paint, flux or Clear Glaze (item CLEGLA) mixed in a 1:1 ratio with mineral or baby oil and paint over the applied and dried unfired transfer. Clear Glaze cover-coat is lead and cadmium free.
    *After initial transfer firing, your images may be colorized with china paint in as many firings as desired.

    Paper sold in packs of 10 (8.5" x 11") sheets. Instructions included. Learn More
     
  10. Copy Cal Paper for Ceramics

    Copy Cal Paper for Ceramics

    SKU: 6880
    $3.50
    • Buy 500 for $2.95 each and save 16%

    Maryland China Company and SUBLIMATION NATION are proud to bring you COPY-CAL waterslide decal paper. COPY-CAL transfers should be printed using a color laser printer with regular laser toner, and the transfers can be applied directly to ceramic--no special coating is required!

    This new version of Copy Cal is made for newer printers and copiers that do not use fuser oil, but instead use wax based toners.

    INSTRUCTIONS FOR USING COPY-CAL DECAL PAPER:

    1. Place paper in color photocopier or color laser printer so that the color image will be printed on the top of the shiny side of the decal paper. Placing the paper in the by-pass tray works best because the paper path is the straightest. If available, we also suggest you set your paper setting on your copier or printer to "thick" from "plain paper" to pull more color toner onto the Copy-Cal. If this option is not available, Copy-Cal will still work great.
    2. After printing, cut the decal to proper size.
    3. Place china ware to be decorated in hot water (115-125 degrees F) for a few minutes. Leave the surface wet so the decal will be easy to manipulate.
    4. Place decal paper in lukewarm water (85-95 degrees F) for 3 seconds. Place on table for 45-60 seconds, until decal uncurls.
    5. Slide decal onto china ware and gently work out all water and air bubbles using a paper towel or squeegee. Work from the center toward the edges. The decal may "bubble" if all the air and water are not removed before heating.
    6. Allow china to dry for at least 4 hours. Bubbling may also occur if the decal is not allowed to dry sufficiently.
    7. Heat in preheated oven at 350 degrees F for 15 minutes. Thicker chinaware pieces such as stoneware may require additional heating time. If clear areas turn slightly brown, it is an indication that the heat was too high. Since each oven is slightly different, it may take a few tries to find the ideal temperature setting for your particular oven.
    8. Cool and wipe with water to clean off any excess decal adhesive.

    **Laser copier must have a fuser that uses WAX BASED TONER and does NOT USE FUSER OIL for lubrication**

    COPY-CAL must be ordered in quantities of at least 10 sheets 11" x 17" Item not eligible for any product or freight discounts.

    Watch our video for more information

    Learn More
     
  11. Clock Face Decal, Black, 2.75"

    Clock Face Decal, Black, 2.75"

    SKU: 6371
    $1.00

    This clock face decal is black and measures 2 3/4". It fires onto the china. Learn More
     
  12. Printed Digital Decal Sheet, A3 Size

    Printed Digital Decal Sheet, A3 Size

    SKU: DIGDECA3
    $25.00
    • Buy 5 for $20.00 each and save 20%
    • Buy 20 for $15.00 each and save 40%

    Maryland China can print your digital decals for you. Create a Photoshop file that is size A3 (11.693" x 16.535") and be sure to leave a 0.25" margin around all sides of the paper (so your printable image size is roughly 11" x 16"). We will print and cover coat the resulting image file so you can apply and fire your image to porcelain or ceramic. Specify if you require flux or no-flux toner. Firing instructions will be provided with your decals. Dropbox your file to [email protected] Learn More
     

12 Item(s)

per page
 

Grid  List 

Set Descending Direction